Steel fabrication · Spain
4 sheets instead of 6
Lapas used 4 plates. The same parts laid out at 65% would take 6.
180 parts, 92% of every plate used, done in 35 seconds.
- Parts
- 180
- Used
- 92%
- Time
- 35 s
Nest your parts. Get a file your machine can cut.
Upload DXF parts, nest them on your sheet in the browser, and export the cutting program (G-code) for your machine. Send one sample program and we set up the output for your controller.
2,000+ shops have run 8,519 nests through Lapas. 1032 of them this month. (as of 16 Sep 2026)
Free plan includes the full nesting engine, unlimited nesting and re-nests, 5 project exports a month. No credit card, no install.
Coming from Deepnest? See how Lapas compares →
Real customer job · sheet 1 of 2
Pushed together by Lapas, 85.5% used
Remnant kept: 318 mm, 24% of the strip
Plate comparisons are arithmetic, not a measurement: the same total part area laid out at an assumed 65% utilization for a hand layout. Your own result depends on your parts and on how you nest today.
Hover or tap a part to see its size.
Real jobs, real numbers
Utilization is the share of the plate that leaves as parts. The rest is offcut.
Independently benchmarked
We ran Lapas Core v1.1 head to head against Deepnest on 37 nesting cases: same parts, same plates, same time budgets, then scored every result with an independent program that reads the output geometry. On the standard density tests Lapas left 13.9% of the plate as offcut against Deepnest's 26.7%, and on real jobs it fits the same parts on fewer plates. Fewer plates means lower material spend on every run.
Read the full benchmarkSame 187-part job: Lapas fits 2 plates (left); Deepnest needs 3 (right).
How it works
If you can upload a file, you can use Lapas.
Drop in your DXF, DWG, SVG, PDF, Illustrator or LightBurn file. Set how many of each part you need.
AutoCAD, SolidWorks, Fusion 360, FreeCAD: all supported.
Enter sheet dimensions, part spacing, and how long the optimizer may search.
Multiple sheets, rotation rules, and grain direction supported.
Download DXF or PDF report. Ready for the machine or your customer.
See sheets needed, utilization %, and part placement.
Lapas doesn't replace your CAM. It hands back a nested DXF. Lead-ins, kerf compensation, and cut sequencing stay in the tools you use today. If your machine reads DXF, it works with Lapas.
See it in action
Open the demo page for a step-by-step breakdown of this job.
Lapas is a nesting program that runs in your browser. You upload flat parts as DXF or SVG, enter the sheet size and the part spacing, and Lapas arranges the parts on the sheet for you. That is automatic nesting: nobody drags shapes into place, and you can still move or rotate a part by hand when a job needs it.
It is CNC nesting software for the machines most shops already run: fiber, CO₂ and diode lasers, plasma, waterjet, CNC routers and knife cutters. If you are choosing a nesting program, the useful test is your own file, and the free plan lets you run one without a credit card.
Think of Lapas as cad cam nesting software that does one step well: automatic nesting. Your CAD exports the flat parts, Lapas nests them, and your CAM keeps handling lead-ins, kerf compensation and cut sequencing. Unlike a full cad cam nesting software suite, it does not replace your CAM.
Automatic nesting also keeps track of what is left over. Lapas stores remnants in their real shape and suggests the ones that fit when you set up the next job, so the offcut from today's work can start tomorrow's. As a nesting program it stays out of the way: upload, nest, export, cut.
Most shops start with one real file. In a cad cam nesting software workflow, that is the flat DXF your CAD already exports. If you want to see how the layouts hold up before you commit, the benchmarks show the results we measured. Any CNC nesting software, like any nesting program, should be judged on your parts. You can nest yours on the free plan, and automatic nesting works from the first upload.
The problem
of every sheet goes in the scrap bin. At $4k/month in steel, that's up to $1,200 thrown away.
your best operator spends laying out parts by hand instead of running the machine.
is what the enterprise platforms tell you. SigmaNEST publishes no price list, so the cost arrives after a demo.
ROI calculator
Move the sliders. See what you could save each month.
A real job at your volume
Steel fabrication, Spain put 180 parts on 4 plates instead of 6, using 92% of every plate, in 35 seconds.
Assumes optimized utilization reaches 85%, in line with the customer jobs shown above and in the panel. Actual savings depend on part complexity, material type, and operator method.
Shops using Lapas
Four real jobs, run by Lapas customers on their own parts. Every number below came off the job itself.
Steel fabrication · Spain
Lapas used 4 plates. The same parts laid out at 65% would take 6.
180 parts, 92% of every plate used, done in 35 seconds.
Design engineering
Lapas used 18 plates. The same parts laid out at 65% would take 22.
295 parts across 18 plates instead of 22, in under three minutes.
Sheet metal · Argentina
Lapas used 4 plates. The same parts laid out at 65% would take 5.
A full production run nested in under three minutes.
Toolmaking · United States
The kind of batch that takes an operator most of a morning by hand.
Plate comparisons are arithmetic, not a measurement: the same total part area laid out at an assumed 65% utilization for a hand layout. Your own result depends on your parts and on how you nest today.
Nest my first sheetBook a callSee what people using Lapas think about their nesting experience.
Figures as of 16 Sep 2026
Being able to generate G-code directly from the same software that I'm using to nest the parts together is a big time saver.
Small parts automatically get micro joints that support them & keep them in place.
A small shop owner running a plasma or laser table explains how G-code export and automatic micro-joints fit into his workflow.
Lumberjack Engineering @lumberjackengineering USA (Indiana) Posted on Instagram
Watch on Instagram (opens in a new tab)Fantastic result compared to my old deepnest.io ...
This is amazing. I love the option to keep my layer names.
This has been the most useful software so far; thank you for it.
I just did my first nest in Lapas and it works great!
Lapas sponsors student teams and university labs with its nesting software. They use it to lay out parts on sheet material before they cut.
BCN eMotorsport (opens in a new tab) Barcelona, Spain Electric and driverless Formula Student team at the Universitat Politècnica de Catalunya (UPC). bcnemotorsport.upc.edu
Sunshine Coast Grammar School (opens in a new tab) Queensland, Australia Robotics program at the school. scgs.qld.edu.au Features
Not a bloated CAM suite. Just a nesting engine that works.
Parts pack by their real shape, not bounding boxes. Curves, arcs, and irregular shapes fit tight.
Keep the leftover from every job in its real shape, L-shapes included. The next job suggests the offcuts that fit and nests onto their true outline.
How it works →Watch parts drop onto the sheet in real time. See utilization climb as it runs.
Drag or rotate any part to clear a clamp or a flaw in the plate. The export matches what you moved.
From AutoCAD, SolidWorks, Fusion 360, FreeCAD, Illustrator or LightBurn - upload and nest in one step.
Arcs and circles from your drawing stay true arcs, and your layer names carry through. Plus a PDF job report with sheet drawings, utilization and cost estimates.
No download. No IT. Any desktop browser on Windows, Mac or Linux.
From the founder
"I build nesting algorithms for a living, and I kept hearing the same thing from small shops: the good nesting software costs more than the laser's monthly payment, and the free tools ask you to install a desktop app and work the rest out yourself. Lapas is my answer - a serious nesting engine at a price a three-person shop can justify. Try it on your own files and email me what's missing. I read every message."
How Lapas gets better
FAQ
Short answers to the things people ask most.
Nesting is free and unlimited - upload your DXF and see the full layout, no part cap, no credit card. The free plan includes 5 project exports a month (any format); re-exporting a project you already exported is free for a week. Pro removes the export cap - $49/month, or $39/month billed annually.
Only taking files out: downloading a project as DXF, SVG, G-code, PLT, or the PDF report. Nesting, re-nesting, changing spacing, swapping sheet sizes, and viewing the full layout never use one. Exporting a project uses one export, and re-exporting that same project is free for 7 days afterwards.
From the Subscription page in your account: it links to the billing portal, where you cancel in a couple of clicks. No email, no call, no reason needed. Pro stays on until the end of the period you have already paid for, then the account drops to the free plan and keeps your projects. Cancel before day 7 of the trial and you are never charged.
Unless you cancel before day 7, the trial converts to the paid term you picked and the card on file is charged on that day: $49 for monthly or $468 for annual, plus VAT where applicable. We email a receipt for every charge. Cancel before day 7 and there is no charge at all.
We do not refund partly used billing periods, except where the law requires it. If you are a consumer in the EU or EEA you have a 14-day right of withdrawal on a new subscription; because Pro starts the moment you subscribe, the checkout asks you to tick a box acknowledging that the right ends once you use the service within those 14 days. If something on our side genuinely failed, write to [email protected] and we will sort it out.
Between your CAD and your CAM. You export flat parts as DXF from CAD, Lapas arranges them on the sheet, and you take the nested DXF into your existing CAM software - which still handles lead-ins, kerf compensation, and cut sequencing exactly as it does today. Nothing about your machine setup changes.
They stay yours. Files are transferred over encrypted HTTPS, processed to compute the layout, and never shared with anyone or used for anything else. You can delete your files and your account at any time.
Almost certainly. Lapas reads DXF files from AutoCAD, SolidWorks, Fusion 360, FreeCAD and the other standard CAD tools: LWPOLYLINE, LINE, ARC, CIRCLE, ELLIPSE and SPLINE, and block references (INSERT) are expanded for you, so there is no need to explode them first. It also imports DWG, SVG, vector PDF, Adobe Illustrator and LightBurn files.
No. Lapas runs in your browser. No download, no IT. Works in any desktop browser on Windows, Mac or Linux.
Most shops see 15–30% better utilization vs. manual nesting. Typical results vary by job type and current method. Try the ROI calculator above to estimate your savings - or better, run one of your own jobs through the free plan and compare.
Compatible with most CNC cutters: fiber/CO₂/diode lasers, plasma, waterjet, CNC routers, knife cutters. Export your nested layout as DXF - compatible with virtually all CAM software and controllers.
Yes, on every plan. Lapas keeps your plate stock by material, thickness and size, with cost, location, SKU, supplier and heat number. Consuming a finished job takes its sheets out of stock and keeps the leftover in its real shape, L-shapes included, with a rack code to write on the metal. The next job suggests the remnants that fit, and Lapas nests onto their true outline. Nothing is written into an ERP.
Deepnest is a free, open-source desktop tool, and it is still going: the original stopped at v1.0.5 in 2021 but the deepnest-next community fork shipped v1.5.6 in May 2025, and that fork is what our published benchmark runs against. Lapas is browser-based on any OS, handles DXF natively, has live preview, and exports DXF and a PDF report. Deepnest is free and runs offline, which Lapas does not.
Still have questions? Email us - we reply fast.
Upload one of your own DXF files and see the layout yourself. It's free and takes about two minutes.
On a phone? Book a 20-minute call and we nest your file with you on a screen share.
No credit card and nothing to install. We never share your uploaded files with third parties.
The call is free, takes 20 minutes and commits you to nothing.
See it on your own parts Free 20-minute screen share · Contact
Book a call