Skip to content

AutoCAD nesting

Nest your AutoCAD drawings in the browser

Draw the parts in AutoCAD. Lapas takes the DXF or DWG, arranges the true outlines on your sheet in the browser, and hands back a nested DXF for your CAM.

Read this first

Lapas does not integrate with AutoCAD. There is no plugin, no add-in and nothing to install.

You do not need one. AutoCAD saves DXF and opens DXF, and that round trip is the whole workflow. There is no plugin, no LISP routine and nothing installed inside AutoCAD, and neither system needs to know the other exists.

How the handoff actually works

Who does what, in order. Nothing here requires either system to know the other exists.

  1. 1 AutoCAD Draw each part as a closed outline

    A part needs one closed contour. Lines that nearly touch but do not connect read as loose lines, not as a part. PEDIT with Join, then Close, turns them into one polyline.

  2. 2 AutoCAD Save as DXF, or keep the DWG

    Use Save As and choose a DXF type. The Options button in that dialog has the DXF options, including whether to write the whole drawing or only selected objects, which is handy when one drawing holds many parts. Lapas also imports DWG, so you can skip this step.

  3. 3 You Set the units on purpose

    Check the drawing units before you save. A mismatch between what the drawing meant and what the file header says is the usual reason a part comes out at the wrong size.

  4. 4 You Upload the files to Lapas

    Set a quantity for each part, then the sheet size and part spacing. Lapas reads the unit from the file header and shows it as declared, so you can see it before you nest. Block references are expanded for you; there is no need to explode them first.

  5. 5 Lapas Run the nest

    Lapas fits the real outlines together and shows the parts landing on the sheet as it works. Check the result against the sheet you actually have before you export.

  6. 6 Lapas Export the nested DXF and the PDF report

    The DXF is one file per sheet. The PDF carries sheet count, utilization and the placement list. Both are on the free plan.

  7. 7 You Open the nested DXF in AutoCAD or your CAM

    Open it in AutoCAD to check or annotate, or take it straight to your CAM for lead-ins, cut order and the post.

AutoCAD behaviour checked against the Autodesk Saveas Options help for DXF files in November 2026. Lapas behaviour per the pricing page.

AutoCAD is a trademark of its respective owner. Lapas is an independent product and is not affiliated with, endorsed by, sponsored by or certified as compatible by them.

What stays manual

  • One DXF or DWG per part, or one drawing with the parts in it. There is no batch link to AutoCAD.
  • Typing quantities into Lapas. It cannot read a block attribute table or a data extraction.
  • Choosing sheet size and part spacing per job.
  • Closing open outlines in AutoCAD before you upload.
  • Taking the nested DXF back into AutoCAD or your CAM and generating toolpaths.

When Lapas is the wrong tool here

  • You expect the layout to follow later edits to the drawing. Lapas works from the files you uploaded, so a changed part needs a fresh upload.
  • The parts are plain rectangles for a panel saw. A cut-list optimiser is the better tool for those.
  • You want machine-ready posts. Lapas hands over DXF; its G-code export is beta and has not been validated across controllers.
  • A job is only two or three parts. Placing them by hand in AutoCAD takes less time than the round trip.

What people mean by AutoCAD nesting

The question behind AutoCAD nesting is usually practical: the parts are drawn, the sheet is bought, and the parts have to be arranged to cut as few sheets as possible. AutoCAD is a drafting tool. It draws each outline well, but it is not built to search for the best arrangement of dozens of different outlines at once. That search is the part Lapas takes on.

Lapas runs in the browser beside AutoCAD, not inside it. Upload the DXF or the DWG, give each part a quantity, set the sheet and the part spacing, and Lapas arranges the true outlines on the sheet. Nesting the real shape, not a rectangle around it, is what lets curved parts sit closer together.

Getting an AutoCAD drawing ready to nest

Most problems with nesting an AutoCAD file come from the drawing, not from the nesting. Drafting tolerates things a nesting program cannot: outlines made of separate lines with tiny gaps, duplicate lines drawn on top of each other, and units that were only ever implied. Three habits catch nearly all of them.

First, make each part a single closed polyline. Select the lines, run PEDIT, choose Multiple, then Join. Second, run OVERKILL to remove duplicate and overlapping geometry. Third, check the drawing units before you save. Lapas reads the unit from the file header and shows it as declared, and you can re-read a file as another unit if the header was wrong. The DXF troubleshooting guide walks through each fix.

Layers help too. In Lapas each DXF layer can be set to Cut, Engrave or Ignore, so dimensions, centre lines and notes that live on their own layers can be ignored, and a marking layer can be kept as engraving. Lapas remembers the setting for your next file.

One drawing with many parts

Many AutoCAD users keep a whole job in one drawing, with every part laid out side by side. You do not have to split it before nesting: the Save As options in AutoCAD can write only the objects you have selected, so one part, or a group, goes into its own DXF. If you would rather skip that, upload the DWG, which Lapas converts on the server, and set each layer to Cut, Engrave or Ignore so notes, dimensions and centre lines stay out of the cut.

Who this suits

It is for drafters and shops that draw in AutoCAD and send flat parts to a cutter, and that would rather not rearrange them by hand. Try it on one drawing you have already cut, on the free plan, and compare the sheet count. The DXF nesting page explains what happens to the file on import.

Common questions

Is there an AutoCAD plugin for Lapas?

No. There is no plugin, LISP routine or add-in, and nothing to install inside AutoCAD. AutoCAD saves DXF and Lapas imports it, so the handoff works without either side knowing about the other.

Can I upload a DWG instead of a DXF?

Yes. Lapas imports DWG, converting it on the server, as well as DXF, SVG, vector PDF, Illustrator and LightBurn files. Saving a DXF is still the safer route if a DWG does not open the way you expect.

Why does my AutoCAD drawing import with no parts?

Usually open contours. A part needs a closed outline, and lines that almost touch read as loose lines. In AutoCAD, run PEDIT, choose Multiple, then Join and Close, and save again. If the parts are there at the wrong size, it is units.

Do I need to explode blocks first?

No. Lapas expands block references automatically and applies their position, rotation and scale, so you can upload the drawing as it is.

What does AutoCAD nesting with Lapas cost?

You can do all of it on the free plan, which has no expiry and no card. The one limit is five project exports a month. Pro is $49 a month, or $39 billed annually, plus VAT where it applies.

Other stacks: all CAD and CAM workflows. Measured nesting results: the benchmark.

Don't take our word for it.

Upload one of your own DXF files and see the layout yourself. It's free and takes about two minutes.

On a phone? Book a 20-minute call and we nest your file with you on a screen share.

No credit card and nothing to install. We never share your uploaded files with third parties.

The call is free, takes 20 minutes and commits you to nothing.